home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 25 / Cream of the Crop 25.iso / bbs / ladder50.zip / LADDERS.DOC < prev    next >
Text File  |  1997-01-18  |  28KB  |  607 lines

  1.  
  2.                              LADDERS   DICE
  3.  
  4.                                   v5.0
  5.  
  6.                                    by
  7.  
  8.                               Al Lawrence
  9.  
  10.                             Sunrise-80  BBS
  11.                  (404) 256-9525 (USR v.everything 33.6)
  12.                  (404) 705-9104 (USR v.everything 33.6)
  13.                  (404) 256-9518 (Voice, 9am-9:30pm EST)
  14.                     (EMAIL) al_lawre@ix.netcom.com
  15.  
  16.  
  17.  
  18.  
  19.                                 OVERVIEW
  20.                                 ________
  21.  
  22.  
  23.    LADDERS DICE is a highly challenging, fast-paced, dice game that
  24.    requires some luck and good strategy. The object of the game is to
  25.    "capture" three ladders by reaching the top of the ladders, based
  26.    upon the roll of the dice.
  27.  
  28.  
  29.    NOTE: Most errors will be logged to a file called DFRAME.ERR, which is
  30.          created in the directory you run the door from.
  31.  
  32.  
  33.  
  34.                 NON-REGISTERED   R E S T R I C T I O N S
  35.                 ----------------------------------------
  36.  
  37.                 ° No Bulletins created
  38.                 ° Games per day limited to 3
  39.                 ° Keyboard timeout value limited to 2 minutes
  40.                 ° Makeup days disabled
  41.                 ° Game time limit disabled
  42.                 ° Can not send/receive messages to/from other players
  43.  
  44.  
  45.  
  46.  
  47.                               INSTALLATION
  48.                               ____________
  49.  
  50.  
  51.    Installation is fairly easy and straight-forward. The following steps and
  52.    examples should have you up and running in a very short period of time.
  53.    It is assumed that you are familiar with setting up DOORS on your system.
  54.    To this end, only examples of the configuration file and Door batch file
  55.    are described.
  56.  
  57.       1) Create a directory to hold all LADDERS files
  58.  
  59.       2) Unzip LADDERxx.ZIP into the the above directory
  60.  
  61.       3) Create a configuration file, with a name of your choice, or
  62.          modify the supplied LADDERS.CFG file. A description follows:
  63.  
  64.             **                       Location of system file (See Below)
  65.             SUNRISE-80 BBS           Your BBS Name
  66.             Al                       Sysop's First name
  67.  
  68.             Lawrence                 Sysop's Last Name
  69.  
  70. |-----------------------------------------------------------------------------|
  71. | READ!     1                        CommPort  \ These 2 lines are required   |
  72. | READ!     1                        Node #    / ONLY for GTUSER.BBS          |
  73. |-----------------------------------------------------------------------------|
  74.  
  75.             00000000                 Registration Number
  76.  
  77.     !   #   3                        Maximum # of Games per day
  78.                                      (Sysop get 99 in Registered verion ONLY!)
  79.  
  80.         #   0                        Max # of days a caller can make up, during
  81.                                      calls in one day. 0=Disable Make-up Option
  82.                                      Maximum value = 27, Minimum value = 1
  83.  
  84.         #   NONE                     Drive:\Path\Filename to contain the
  85.                                      Top Score Bulletin or enter NONE
  86.                                      for NO Bulletin creation.
  87.  
  88.         #   NONE                     Drive:\Path\Filename to contain the
  89.                                      Top Score Bulletin (Color) or enter NONE
  90.                                      for NO Bulletin creation.
  91.  
  92.         #   NONE                     Drive:\Path\Filename to contain the
  93.                                      Hall of Fame Bulletin or enter NONE
  94.                                      for NO Bulletin creation.
  95.  
  96.         #   NONE                     Drive:\Path\Filename to contain the
  97.                                      Hall of Fame Bulletin (Color) or enter NONE
  98.                                      for NO Bulletin creation.
  99.  
  100.             2                        1 = DO NOT Display ADOPT-A-DOOR Message
  101.                                      2 = Display ADOPT-A-DOOR message
  102.  
  103.         #   2                        Keyboard timeout value in Minutes
  104.  
  105.         #   3                        # of Ladders to Complete to Accumulate Pts
  106.                                      (Valid range is 1-12. Default = 3)
  107.  
  108.         #   50                   Pts to Deduct if HiScore >   100 & <   500
  109.         #   100                              "            >   499 & <  1000
  110.         #   300                              "            >   999 & <  4999
  111.         #   1000                             "            >  4999 & < 10000
  112.         #   2000                             "            >  9999 & < 20000
  113.         #   3000                             "            > 19999 & < 30000
  114.         #   5000                             "            > 29999 & < 40000
  115.         #   7000                             "            > 39999 & < 50000
  116.         #   9000                             "            > 49999 & < 60000
  117.         #   10000                            "            > 59999 & < 70000
  118.         #   15000                            "            > 69999
  119.  
  120.     !   #   0                        Time Allowed in Door
  121.                                      (Sysop = Time Remaining - REG. VERSION)
  122.  
  123.         #   N                        Automatic game reset at end of month:
  124.                                        Y = Yes enable autoreset
  125.                                        N = Keep accumulating scores
  126.  
  127.         #   Y                        Y = Allow Sysop to have 999 games
  128.                                      N = Do Not Allow Sysop 999 games
  129.  
  130.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  131.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  132.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  133.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  134.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  135.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  136.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  137.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  138.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  139.     !   #   000=00/00                 Security Level/Games Allowed Per Day
  140.  
  141.     @   #   XXXX/YYYY                 Blackout Range  From/To
  142.     @   #   XXXX/YYYY                 Blackout Range  From/To
  143.     @   #   XXXX/YYYY                 Blackout Range  From/To
  144.     @   #   XXXX/YYYY                 Blackout Range  From/To
  145.     @   #   XXXX/YYYY                 Blackout Range  From/To
  146.  
  147.  
  148.             000                       Unique 3-digit number used as a suffix
  149.                                       for the exported score file name, if
  150.                                       you wish to paricipate in an Inter-BBS
  151.                                       game. 000=no Inter-BBS participation.
  152.  
  153.             N                         Y = Force Caller to respond to
  154.                                           Instructions <y/n). May need this with
  155.                                           Digiboards.
  156.                                       N = Allow caller to press ENTER in
  157.                                           response to Instructions <y/N>
  158.  
  159.             0                         Use this option to LIMIT the number of
  160.                                       HIGH SCORE entries to be displayed. A
  161.                                       ZERO(0) = NO LIMIT
  162.  
  163.             0                         Number of months to keep in the SUNHOF
  164.                                       files (Hall of Fame). 0 = ALL
  165.  
  166.             N                         Y = Use Alias for Caller's name
  167.                                           (Requires Door.Sys)
  168.                                       N = Use Logon Name for Caller's name
  169.  
  170.  
  171.         #   Y                         Y = Allow Messages to be sent/received
  172.                                       N = Do NOT allow messages to be sent/read
  173.  
  174.             Y                         Y = Log all callers to USAGEx
  175.                                       N = Do not log callers
  176.  
  177.  
  178.        ** = Replace with ONE of the following:
  179.  
  180. C:\bbs\PCBOARD.SYS              <- For PCBoard systems using PCBOARD.SYS only
  181. C:\BBS\CALLINFO.BBS             <- For Wildcat! systems (prior to v3.0)
  182. C:\BBS\DOOR.SYS                 <- For ANY systems that support DOOR.SYS
  183. C:\BBS\DORINFOx.DEF             <- For ANY systems that support DORINFOx.DEF
  184. C:\BBS\SFDOORS.DAT              <- For Spitfire systems.
  185. c:\bbs\TRIBBS>SYS               <- For TriBBS systems.
  186. C:\BBS\GTUSER.BBS               <- For GT Power
  187.                                    * if using this option you must put the
  188.                                      ComPort # on line 5 and the Node # on
  189.                                      line 6 of the configuration file
  190.  
  191.  
  192.  
  193.  
  194.        # = Requires registration to change to a different value.
  195.        ! = See "Plays Per Day" Below
  196.        @ = See "Blackout Periods" Below
  197.  
  198.                NOTE: There are NO Blank Lines in the Config File!!
  199.  
  200.  
  201.       4) Create a batch file or modify the LADDERS file supplied. A
  202.          description of this file follows:
  203.  
  204.             ECHO off
  205.             cd\BBS\DOORS\LADDERS      Location of Ladders files
  206.             LADDERS LADDERS.CFG       EXE filename and CNF filename (Name
  207.                                       used in creating file in #3 above)
  208.             CD\BBS
  209.             BOARD
  210.  
  211.  
  212.        5) When running in more than one node, be sure to supply a
  213.           different configuration name for each node (your choice of name).
  214.  
  215.        6) If running with Fossil-based multi-port boards add
  216.            /FD to the line containing the CFG name as follows:
  217.  
  218.                           LADDERS LADDERS.CFG /FD
  219.  
  220.  
  221.  
  222.  
  223.                           TROUBLESHOOTING
  224.                           ---------------
  225.  
  226. (1) If you are running this Door on a 486 system and encounter errors such as
  227.  
  228.     ERROR 6.... OVERFLOW Error
  229.     ERROR 5.... ILLEGAL Function Call (may be associated with other problems)
  230.     KEYBOARD Timeout after 5 minutes
  231.  
  232.     You may have to put the following line in your AUTOEXEC.BAT file:
  233.  
  234.          SET NO87=ON
  235.  
  236. (2) If you encounter an Error 62 (Input Past End of File), BEFORE you see the
  237.     opening screen of the Door, your problem will more than likely be associated
  238.     with the CFG file. The error 62 means that you do not have enough entries
  239.     in the CFG. Compare your CFG file with the CFG definition in the DOC file.
  240.  
  241.  
  242. (3) If you encounter an ERROR 70... Permission Denied, this will more than
  243.     likely mean that you DO NOT have SHARE loaded. SHARE is a DOS file that
  244.     comes with your version of DOS. To load it type the word SHARE at the DOS
  245.     prompt. To load it permanently type the word SHARE on a line by itself in
  246.     your AUTOEXEC.BAT file, any place prior to the loading of your BBS
  247.     software. There have been numerous reports that loading SHARE high causes
  248.     some problems, so to be on the safe side, do not load it high.
  249.  
  250.  
  251. Should you have any questions or problem, please do not hesitate to call
  252.    voice for immediate help... 404-256-9518 (9am-9:30pm EST) any day!
  253.  
  254.  
  255.  
  256.  
  257.                              USAGE LOG
  258.                              ---------
  259.  
  260. As an option, we provide you with the ability to log every player to a text 
  261. file. IF you enter Y in the CFG file to log callers, the Door will place the
  262. caller's name as well as the ON and OFF times each time a caller selects the
  263. Door. A separate file will be created for each Node and the name of the file
  264. will be USAGEx, where x is the Node number.
  265.  
  266. You may delete these files at any time and the Door will recreate them the
  267. next time a caller enters the Door. If you do NOT want to continue logging
  268. callers, change the CFG file entry to N.
  269.  
  270.  
  271.  
  272.  
  273.  
  274.                             POOL Points
  275.                             ------------
  276.  
  277. When you end up losing points, LADDERS will place them into a "POOL". This
  278. "POOL" will continue to accumulate all points lost by any player. It will
  279. also accumulate the points lost by those playing on any other node(s) at the
  280. same time. The "POOL" points will be updated on the players screen REAL TIME
  281. (at the moment the player on another node loses points). The "POOL" points
  282. can be won by any player, that wins the game by removing 3 Ladders, 2 of
  283. which MUST be the "2" and "12" Ladders. The minimum amount in the "POOL"
  284. will be 100 points.
  285.  
  286.  
  287.                           BLACKOUT PERIODS
  288.                           ________________
  289.  
  290.       Use the Blackout ranges option to define up to 5 time periods during
  291.       which you DO NOT want the Door to be played. If a caller tries to access
  292.       the Door during the Blackout period, they will be shown a message that
  293.       contains ALL the Blackout periods you have defined, and to try the Door
  294.       at a later time.
  295.  
  296.       Each of the 5 Blackout ranges takes the form of XXXX/YYYY, where
  297.       XXXX=beginning time and YYYY=the ending time. For example, 0930/1230
  298.       means to NOT allow the Door to be played between 9:30am and 12:30pm.
  299.  
  300.       IMPORTANT: - All times must be 4 digits & must follow the XXXX/YYYY format
  301.                  - DO NOT change the XXXX/YYYY entry UNLESS you want to assign
  302.                    a Blackout range.
  303.                  - You MUST use the MILITARY time format. Example: 2030=8:30pm
  304.                    0900=9am, 0030=12:30am, 1700=5pm, etc.
  305.        NOTE: The deduction values, above, are the default values. The pgm
  306.              will check each value to ensure that it is equal to or greater
  307.              than the prior value. If it fails the check default values will
  308.              be used. If you do change the default values it will be your
  309.              reponsibility to edit the LADDERS.INS file and change the
  310.              deduction table contained within.
  311.  
  312.  
  313.                           PLAYS Per DAY/DOOR Time
  314.                           _______________________
  315.  
  316.       Plays Per Day and Door Time can be controlled several ways:
  317.  
  318.       (1) You can use the Games Per Day, singular option, in the config
  319.           file above. This option, will affect ALL callers whose Security
  320.           Level is NOT defined in any of the 10 optional Security Level/
  321.           Plays Per Day entries in the config file.
  322.  
  323.       (2) You can use the Door Time, singular option, in the config file
  324.           above. This option, will affect ALL callers whose Security
  325.           Level is NOT defined in any of the 10 optional Security Level/
  326.           Plays Per Day/Door Time entries in the config file.
  327.  
  328.       (3) You can restrict the number of games a specific Security Level
  329.           will be allowed to play per day or REWARD specific Levels with
  330.           more Plays Per Day.
  331.  
  332.           Likewise, you can restrict the Play time for a specific Security
  333.           Level or REWARD specific Levels with more Door Time.
  334.  
  335.           These options are handled by the use of the 10 config
  336.           entries (000=00/00).
  337.  
  338.           The format of each entry is as follows:
  339.  
  340.           XXX=YY/ZZ  where XXX is the Security Level (must be 3 digits)
  341.                      where =  is a constant and MUST be included
  342.                      where YY is the # of games per day (must be 2 digits)
  343.                      where / is a constant and MUST be included
  344.                      where ZZ is num. minutes per Door entry (must be 2 digits)
  345.  
  346.           If the callers Security Level is NOT defined, his/her Plays Per
  347.           Day and Door Time will be controlled by the values in items
  348.           (1) and (2), above, respectively..
  349.  
  350.           You may define up to 10 Security Levels. All unused entries must
  351.           be defined as   000=00/00
  352.         --------------------------------------------------------------------
  353.           Example: Suppose you had 3 Security Levels defined on your BBS as
  354.           (20=Subscriber, 30=Visiting Sysop, 40=CoSysop, 90=Friend) and you
  355.           wanted to set Plays Per Day as :     Subscriber=5
  356.                                            Visiting Sysop=2
  357.                                                   CoSysop=3
  358.                                                    Friend=10
  359.  
  360.           and Door Time as follows:     Subscriber=30 minutes
  361.                                     Visiting Sysop=20 minutes
  362.                                            CoSysop=10 minutes
  363.                                             Friend=remaining call time
  364.  
  365.  
  366.           You would set the Individual "Games per Day" config entry to 1 and
  367.           the individual "Door Time" to 5 minutes (these would be the
  368.           default number of games and default Time for all Security Levels
  369.           other than 20,30 or 40... make them any number you want). Next you
  370.           would replace 4 of the Security Level entries as :  020=05/30
  371.                                                               030=02/20
  372.                                                               040=03/10
  373.                                                               090=10/0
  374.  
  375.  
  376.  
  377.                      Player-to-Player MESSAGES
  378.                      -------------------------
  379.  
  380. In the REGISTERED version of the Door, your players will be able to send 
  381. messages back and forth to each other. All messages are PRIVATE and all 
  382. messages are maintained within the Door itself and havs no connection to the 
  383. BBS' message bases. The Message file (LADDERS.MSG) will be restarted when the 
  384. Door game restarts at the beginning of each month. If you do not restart your 
  385. games on the first of each month then you must manually delete the MSG file. 
  386. The file will continue to grow if not deleted and restarted.
  387.  
  388.                         INTER-BBS OPTION
  389.                         ----------------
  390.  
  391. The Inter-BBS option is used when you are looking for a way to expand the 
  392. Ladders Dice competition beyond just running it on your BBS alone. With this 
  393. option you can join with any number of other BBS' to create some very 'heated' 
  394. scoring competition and exchange messages.
  395.  
  396. The Inter-BBS option has its own High Score file and when High Scores are 
  397. displayed, on participating BBS', the name of the BBS on which the score was 
  398. obtained will also be displayed. At the end of the month, the Inter-BBS scores 
  399. will be reset automatically and a winner will be determined and displayed as 
  400. part of the High Score display in the next month.
  401.  
  402. This option requires that the Door be registered.
  403.  
  404. The InterBBS files (EXE, HIS, DOC, etc) can be found in the included file 
  405. called IBBSxx.ZIP (xx = version). Updates to this file will always be found on 
  406. the SUNRISE-80 BBS and many other BBS'.
  407.  
  408. The Inter-BBS option uses the 'HUB' and 'NODE' concept. The 'HUB' is the 
  409. central/controlling BBS to whom all the other BBS' ('NODES') upload/transfer 
  410. their score files. The 'HUB' then merges all score files and makes a merged 
  411. file available for the 'NODES' to download/transfer.
  412.  
  413.  
  414.  
  415.                         NON-STANDARD COM SUPPORT
  416.                         ________________________
  417.  
  418.       Support for COM 1-4 on the standard IRQ's - COM1/COM3 = IRQ4 and
  419.       COM2/COM4 = IRQ3. If you wish to use a non-standard IRQ, add the IRQ
  420.       number after the configuration filename. Let's assume your Door is
  421.       called FOOBAR and you want to use COM1 and IRQ5. The command line
  422.       passed to your Door would be:
  423.  
  424.                             FOOBAR FOOBAR.CFG /5
  425.  
  426.       The /5 tells FOOBAR to use IRQ5 rather than the standard IRQ4 that is
  427.       normally used with COM1. No /x parameter is needed for the standard
  428.       IRQ's.
  429.  
  430.       As an alternative, you may use an environmental variable on the command
  431.       line. To use the variable (following the example above), place a
  432.       SET IRQ=5 in the batch file used to bring up your BBS (you would need a
  433.       different IRQ number for each node). The command line would now look
  434.       like this:
  435.  
  436.                           FOOBAR FOOBAR.CFG /%IRQ%
  437.  
  438.       This, in combination with the use of the environmental variables
  439.       described in the MULTI-NODE SETUP section will allow you to use one
  440.       batch file and one config file to run this door on all nodes.
  441.  
  442.  
  443.  
  444.  
  445.                            MULTI-NODE SETUP
  446.                            ________________
  447.  
  448.       All Sunrise Doors are Multi-Node capable. Each node must have the
  449.       ability to access a configuration file which will have its own system
  450.       file (DORINFOx.DEF, PCBOARD.SYS, DOOR.SYS, etc) defined on the first
  451.       line. There are 2 ways to accomplish this:
  452.  
  453.       (1) Create a separate configuration file for each node. The only
  454.           difference between each file would be the location of the system
  455.           file for that particular node. For example, on my system there are 2
  456.           nodes and the first line of the config files would look like this:
  457.  
  458.                         NODE1:  H:\PCB1\DOOR.SYS
  459.                         NODE2:  H:\PCB2\DOOR.SYS
  460.  
  461.           Thus, if you have a 4 node BBS, you will need 4 configuration files.
  462.  
  463.       (2) Use ONE configuration file for ALL nodes. This Door will recognize
  464.           the following PCBoard/Wildcat environmental variables:
  465.  
  466.                  PCBDIR    (Directory containing the System file)
  467.                  PCBDRIVE  (Drive containing the System file)
  468.                  WCNODEID  (Active Node Number)
  469.  
  470.           Thus, the first line of the SINGLE configuration file, for this Door
  471.           would look like this:
  472.  
  473.                         %PCBDRIVE%%PCBDIR%\DOOR.SYS
  474.                         c:\wc30\wcwork\node%wcnodeid%\door.sys
  475.  
  476.       NOTE: This option, as described, assumes that you are running PCB or
  477.             Wildcat software. The environmental variables are automatically
  478.             created by the software for each node.
  479.  
  480.             HOWEVER, if you are running other BBS software you should be able
  481.             to set the variables EXACTLY as described below, for EACH node
  482.             (more than likely in each batch file you use to bring up EACH node):
  483.  
  484.                             PCBDRIVE=C:
  485.                             ^^^^^^^^^
  486.                             PCBDIR=\NODE2
  487.                             ^^^^^^^^
  488.  
  489.             Info with a carat (^) under it, MUST be typed as is. The rest
  490.             depends on your naming conventions.
  491.  
  492.             This, in combination with the use of the optional environmental
  493.             variable described in the NON-STANDARD COM SUPPORT section, will
  494.             allow you to use one batch file and one config file to run this
  495.             door on all nodes.
  496.  
  497.  
  498.  
  499.                                ADOPT-A-DOOR
  500.                                ____________
  501.  
  502.     Having been a Sysop for a number of years, I have had my share of problems
  503.     and frustrations getting financial support for my board's upkeep. A fellow
  504.     Sysop left a message on my board, not long ago, about a concept that was
  505.     being used by several boards around the country.
  506.  
  507.     The concept, ADOPT-A-DOOR, allows a caller to register (ADOPT) a door. It
  508.     would be the same as sending in a donation, only this way it is earmarked
  509.     for registering a particular door. In a way, the user feels he/she is
  510.     "getting something in return". As a Door author I have decided to build
  511.     this concept into each of my Door programs. The concept replaces the
  512.     usual message "tell the Sysop to register this Door" we find in most
  513.     doors.
  514.  
  515.     If the Door is unregisterd then a message appears on the opening screen
  516.     to that effect. After finishing or suspending a game, a message screen
  517.     is displayed about the ADOPT-A-DOOR concept. The message also tells the
  518.     caller to contact the Sysop to find out if there is any further details
  519.     to the ADOPT-A-DOOR concept. Some Sysops give extra D/L time, online
  520.     time, etc to callers that ADOPT-A-DOOR.
  521.  
  522.     If the Door has been registered, either by the Sysop or other callers,
  523.     the names of those contributors will be displayed in the closing screen.
  524.  
  525.     NOTE: If you want to display the names of the callers that contributed
  526.           to registering the Door, you must create an ASCII file called
  527.           ADOPT.SYS. You create it with an Editor or Word Processor. Enter
  528.           the name(s) of the contributors (one on each line, maximum of 5
  529.           entries, each a maximum of 30 characters long). This file must be
  530.           saved, in ASCII format, and placed in the Door directory.
  531.  
  532.  
  533.  
  534.                               LEGALITIES
  535.                               __________
  536.  
  537.  
  538.       THIS SOFTWARE AND ACCOMPANYING MATERIALS ARE DISTRIBUTED "AS IS"
  539.       WITHOUT WARRANTY, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
  540.       LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  541.       FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ANYONE INVOLVED WITH
  542.       THE CREATION AND PRODUCTION OF THIS PRODUCT BE LIABLE FOR INDIRECT,
  543.       SPECIAL, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF ANY USE THEREOF
  544.       OR BREACH OF ANY WARRANTY.
  545.  
  546.  
  547.  
  548.  
  549.  
  550.                              DISTRIBUTION
  551.                              ____________
  552.  
  553.    You may make this file available for downloading from your BBS or you may
  554.    upload it to any BBS of your choice, provided that you do not make any
  555.    changes to the contents of the archive (ZIP file). The archive and its
  556.    individual contents may not be used by any service that charges any money
  557.    whatsoever, without the written permission of the author.
  558.  
  559.  
  560.  
  561.  
  562.  
  563.                              REGISTRATION
  564.                              ____________
  565.  
  566.    Registration and the subsequent insertion of the registration number into
  567.    your configuation file, allows for the display of your BBS name on the
  568.    opening and closing screen as well as the reduction of a delay built into
  569.    the opening screen display along with the ability to change certain
  570.    values in the configuration file.
  571.  
  572.    To register your copy of LADDERS, please fill out the registration form
  573.    (REGISTER.FRM) and mail it along with registration fee to
  574.    the name and address on the form.
  575.  
  576.    Once a door is registered, any changes to registration information (Sysop
  577.    name or BBS Name) will require the doors to be re-registered. Download or
  578.    File Request a file named CHANGE.FRM from our BBS, complete the form and
  579.    follow ALL instructions in the document!
  580.  
  581.    Registration fees are subject to change at any time. The most current
  582.    registration form is always available on our BBS. You may download or
  583.    File Request REGISTER.FRM at any time.
  584.  
  585.    Be sure to use the proper upper/lower case when filling in your name and
  586.    BBS name, as they MUST match the way you entered them in the configuration
  587.    file.             ^^^^
  588.  
  589.    Based upon information supplied on the registration form, I will pre-
  590.    register you on my BBS. You will then be able to call SUNRISE-80 and pick
  591.    up your registration number.
  592.  
  593.  
  594.  
  595.                                  MISC
  596.                                  ____
  597.  
  598.    The latest version of LADDERS Dice and other fine SUNRISE DOOR programs
  599.    are always available for download from SUNRISE-80 BBS.
  600.  
  601.    Remember, should you have any problems, questions or suggestions, be sure
  602.    to drop me a message on Sunrise-80 or you can reach me through the
  603.    PCRELAY/RIME network in the BBS Doors, Sysops, PCBHints or through a R/O
  604.    to    ->SUNRISE
  605.  
  606.  
  607.